LV Handbook › System Designer
System Designer Coming soon
Lay out a door, auto-wire readers and locks, and export the cable schedule.
See it in action
Wiring diagram
15 cables · 52 conductors
Boards traced from PLT-05244, PLT-05248, Altronix ACM Series
Power 2.79 A of 6 A · 46%
Scroll to zoom · drag to pan · hover a cable to trace it
Parts
Cable schedule
| ID | Run | Cable | Length |
|---|---|---|---|
| C01 | ACM8 Out 1 → LP1502 TB1 | 18/2 | 6 ft |
| C02 | ACM8 Out 2 → MR52 TB7 | 18/2 | 8 ft |
| C03 | LP1502 TB3 → MR52 TB6 | Belden 9841 RS-485 | 40 ft |
| C04 | LP1502 TB8 → Door 1 Signo 40 | 22/6 shielded | 85 ft |
| C08 | LP1502 TB9 → Door 2 Signo 40 | 22/6 shielded | 120 ft |
| C07 | LP1502 Out 1 → Door 1 strike | 18/2 | 78 ft |
| C11 | LP1502 Out 2 → Door 2 strike | 18/2 | 116 ft |
| C05 | LP1502 TB4 → Door 1 contact | 22/2 | 92 ft |
| C06 | LP1502 TB4 → Door 1 DS160 | 22/4 | 80 ft |
| C09 | LP1502 TB5 → Door 2 contact | 22/2 | 126 ft |
| C10 | LP1502 TB5 → Door 2 DS160 | 22/4 | 118 ft |
| C13 | MR52 TB1 → Door 3 contact | 22/2 | 64 ft |
| C14 | MR52 TB1 → Door 3 DS160 | 22/4 | 58 ft |
| C12 | MR52 TB8 → Door 3 Signo 40 | West Penn 3021 18/6 | 60 ft |
| C15 | MR52 RLY1 → Door 3 strike | 18/2 | 56 ft |
Power 2.79 A of 6 A · 46%
Bill of materials
- 1 × LP1502
- 1 × MR52-S3
- 1 × ACM8
- 3 × HID Signo 40 — Wall-switch, pigtail, black/silver, standard profile, config 000000 (Wiegand). Compatible pigtail replacement for 920PTNNEK00000 (RP40). Supports OSDP; wired Wiegand here.
- 3 × HES 9600-630
- 3 × GRI 180-12
- 3 × Bosch DS160 — Relay 2 dry for REX. Relay 1 is the spike-protected one.
- 1 × AL600ULX PSU board (Layout not traced)
Coming soon
Pan, zoom, and hover this sample layout. The full designer with inputs, save, and export is coming soon. Until then, use the free Tools and wiring diagrams.