LV Handbook › Parts › Ubiquiti › UniFi Access › UVC-G6-Entry
Ubiquiti UVC-G6-Entry
1 / 1

Ubiquiti UVC-G6-Entry

Ubiquiti

Access control · Reader G6 Entry

Documents & links

uvc-g6-entry uvc-g6-entry

Reviews

No reviews yet.

Where to Buy

Guides

Specs

AIAI Detections
IR5 m (16 ft)
LEDsR/G/B/W <a href="https://help.ui.com/hc/en-us/articles/25738084762775-Understanding-UniFi-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
LensFixed focal length
AppleTouch Pass
AudioTwo-way audio (With noise cancellation/ Beam forming)
SoundTwo-Way Audio
Button(1) Ring button (1) Factory reset (1) Tamper switch
SensorMain camera: 5MP CMOS Package camera: 8MP CMOS
Weight275 g (9.7 oz)
MountingWall mount, Gangbox mount plate, 20° wedge mount (Included) Junction box (Optional)
ProcessorQuad-core Arm® Cortex®-A53 based chip
Store SKUUVC-G6-Entry
Dimensions176 x 45 x 29.6 mm (6.9 x 1.8 x 1.2")
Night ModeBuilt-in IR LED illumination and IR cut filter
ResolutionMain camera: 5MP Package camera: 8MP
Face UnlockTrue
ConnectivityBLE 4.1 NFC
Power MethodPoE+ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU (CAUTION: Only use with certified PSUs listed.)
UL 294 LevelDestructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
WeatherproofOutdoor Covered
Field of ViewMain camera: H: 100°, V: 135°, D: 180° Package camera: H: 66°, V: 51.7°, D: 78°
Mobile UnlockTrue
CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Image SettingsColor, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay, HDR
Mount MaterialWall mount: Stainless steel Gangbox mount plate: SGCC steel Gangbox mount cover: Polycarbonate Wedge mount: Aluminum
NDAA CompliantTrue
IR Night Vision5 m (16 ft)
Lens Resolution8 MP Camera
Max. Frame RateMain camera: 30 FPS Package camera: 3 FPS
WeatherproofingIP55
Face RecognitionTrue
UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
Integrated CameraTrue
Tamper ResistanceIK07
Enclosure MaterialAluminum
Apple/Google WalletTrue
Networking InterfaceGbE RJ45 port
Indoor and Outdoor UseYes
Max. Power Consumption16W
Supported Voltage Range42—57V DC
UniFi Application SuiteProtect Access (To enable Access Hub door access features, both UniFi Protect and UniFi Access must be installed on the Cloud Console.)
CAN/ULC-60839-11-1 GradeGrade assignment: I
NFC Card & Keyfob AccessTrue (Requires UniFi Access Hub / Hub Mini for NFC functionality)
PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
Ambient Operating Humidity5 to 90% noncondensing
Ambient Operating Temperature-30 to 50° C (-22 to 122° F)
Two-Way Intercom & Doorbell AccessTrue
Smart Detections (People, Vehicles, Animals)True
Document number, and issue date and/or revision levelUVC-G6-Entry, V01

Discussions 0 tagged

No discussions tagged to this part yet.

Start a discussion about this part