PoE	2 PoE Ports
LEDs	W/B <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
Weight	190 g (6.7 oz)
Buttons	(1) Factory reset (1) Dry/Wet switch
Mounting	DIN-rail (Included)
Store SKU	UA-Hub-Door-Mini
Dimensions	113 x 66 x 27.6 mm (4.4 x 2.6 x 1.1")
Power Method	PoE++ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
UL 294 Level	Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
PoE Interface	(1) PoE++ input, 50V DC, 1A (2) PoE+ outputs, 50V DC, 30W per port (Max 45W aggregated)
Certifications	CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Lock Terminals	1 Lock Terminal
NDAA Compliant	True
Input Terminals	(1) Door exit request (1) Door position
Supported Doors	1
Dry Output Relay	30V DC, 1A
Other locks (1A)	24 AWG length: 9 m (30 ft) 22 AWG length: 15 m (49 ft) 20 AWG length: 24 m (79 ft) 18 UACC-Cable-DoorLockRelay length: 36 m (118 ft)
UL 294 Statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
Wet Output Relay	12V DC, 1A
Additional Inputs	2 Additional Inputs
Enclosure Material	Polycarbonate, metal
Maximum User Count	3,000
Networking Interface	(3) GbE RJ45 ports
Software Information	The software version can be checked at <a href="https://unifi.ui.com/" target="_blank" rel="noopener noreferrer">https://unifi.ui.com</a>
Indoor and Outdoor Use	Indoor only
Management Application	Access
Max. Power Consumption	19W (Without PoE output) 50W (With PoE output)
CAN/ULC-60839-11-1 Grade	Grade assignment: I
PoE Cabling Requirements	Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
UA-Lock-Electric (400mA)	24 AWG length: 25 m (82 ft) 22 AWG length: 42 m (138 ft) 20 AWG length: 66 m (217 ft) 18 UACC-Cable-DoorLockRelay length: 100 m (328 ft)
Ambient Operating Humidity	5 to 90% noncondensing
Ambient Operating Temperature	0 to 40° C (32 to 104° F)
UA-Lock-Magnetic-270kg (800mA)	24 AWG length: 12 m (39 ft) 22 AWG length: 20 m (66 ft) 20 AWG length: 30 m (98 ft) 18 UACC-Cable-DoorLockRelay length: 46 m (151 ft)
UA-Lock-Magnetic-540kg (500mA)	24 AWG length: 12 m (39 ft) 22 AWG length: 20 m (66 ft) 20 AWG length: 30 m (98 ft) 18 UACC-Cable-DoorLockRelay length: 46 m (151 ft)
Document number, and issue date and/or revision level	UA-Hub-Door-Mini, V01

Discussions 0 tagged

No discussions tagged to this part yet.

Start a discussion about this part

Report an issue