Ubiquiti ECS-48S · 1 of 1 · Image: Ubiquiti
Documents & links
| ecs-48s | ecs-48s |
Reviews
No reviews yet.
Where to Buy
Distribution
Market
Guides
Specs
| MAC | 256 |
|---|---|
| IPv4 | 256 |
| SFP28 | True |
| System | True |
| Weight | Without mounting brackets: 10.2 kg (22.5 lb) With mounting brackets: 10.3 kg (22.7 lb) |
| Console | 1 |
| Layer 3 | True |
| Ethernet | True |
| LLDP MED | True |
| Stacking | True (Up to 4 switches per stack and only switches with the same port count) |
| 25G SFP28 | 4 (25G/10G/1G) |
| Store SKU | ECS-48S |
| 1 GbE RJ45 | 1 (1G/100M/10M) (OOB Management port only) |
| DHCP Relay | True |
| Dimensions | 442.4 x 44 x 496 mm (17.4 x 1.7 x 19.5") |
| Fan Method | (4) Hot-swappable fan modules (Fan modules operate with 3 + 1 redundancy) |
| Management | Ethernet OOB Management port Serial Console AR |
| QoS (DSCP) | True |
| Redundancy | Switch Stacking (2) Hot-Swappable PSUs (4) Hot-Swappable Fans |
| STP & RSTP | True |
| Voice VLAN | True |
| 10 GbE RJ45 | 16 (10G/5G/2.5G/1G/100M/10M) (10/100M half-duplex not supported) |
| 100G QSFP28 | 2 (100G) (Stacking port only, does not support uplink. Breakout cables are not supported) |
| Form Factor | Rack Mount (1U, Full-Depth) (Requires a 4-post rack, or a center-mount bracket or cantilever shelf on 2-post racks for optimal support) |
| LCM Display | 1.3" touchscreen |
| 2.5 GbE RJ45 | 32 (2.5G/1G/100M/10M) (10/100M half-duplex not supported) |
| Flow Control | True |
| Jumbo Frames | True |
| Power Method | (2) Universal input, 100–240V AC, 50/60 Hz |
| Power Supply | (2) Hot-swappable AC/DC 550W power modules |
| IGMP Snooping | True |
| Storm Control | True |
| UniFi Network | Version 10.6.101 and later |
| 802.1X Control | True |
| Certifications | CE, FCC, IC |
| ESD Protection | Air: ± 12kV, contact: ± 8kV |
| Mount Material | SGCC steel |
| NDAA Compliant | True |
| Port Isolation | True |
| Port Mirroring | True |
| Cross-Stack LAG | True (An aggregated link spanning switches in the stack. Up to 8 ports per LAG) |
| Forwarding Rate | 506 Mpps |
| Loop Protection | True |
| Supported VLANs | 1,000 |
| Etherlighting™ | True |
| Heat Dissipation | 853 BTU/hr |
| Egress Rate Limit | True |
| Enclosure Material | SGCC steel |
| IPv4 Static Routes | 512 |
| Packet Buffer Size | 8 MB |
| Power Input Method | (2) AC input, Hot-swappable power modules |
| Switching Capacity | 680 Gbps |
| MAC Address Blocking | True |
| Supported Rack Depth | 482.6 mm (19") four-post racks Posts depths ranging from 650 to 1,000 mm (25.6–39.4”) |
| LACP Port Aggregation | True |
| MAC Address Table Size | 32,000 |
| Max. Power Consumption | 250W |
| Supported Voltage Range | 100–240V AC |
| DHCP Snooping & Guarding | True |
| Virtual Network Override | True |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| MAC-Based Port Restriction | True |
| DHCP Server (Local Networks) | True |
| Ambient Operating Temperature | -5 to 40° C (23 to 104° F) |
| Total Non-Blocking Throughput | 340 Gbps |
| Static Routing (Local Networks) | True |
| IP-Based ACLs & Network Isolation | True |
| MAC-Based ACLs & Device Isolation | True |
| Inter-VLAN Routing (Local Networks) | True |
| Multicast & Broadcast Rate Limiting | True |
| Advanced IGMP Configuration (Querier, Fast Leave, Router Port) | True |
| Pro AV Profiles (Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron) | True |
Discussions 0 tagged
No discussions tagged to this part yet.
Report an issue / Suggest an improvement
Max 4. Remove one.
Compare now