RTI ACP-AZ-P2680 · 1 of 1 · Image: RTI
Key specs
| Gain | 30 dB |
|---|---|
| Range | +/- 12 dB |
| Inputs | 8 Stereo Local Analog Inputs, 1 Stereo Bus Coaxial Digital Input, 1 Stereo Bus Analog Input |
| Centers | 75 Hz, 250 Hz, 700 Hz, 2.5 kHz, 12 kHz |
| Standby | 0.9 W |
| Crosstalk | >80 dB @ 1 kHz |
| In the Box | Architect Model P2680 EQ, Loudspeaker Connectors, Remote Connector, Power Cord, Manual, Warranty |
| Protection | clipping, short circuit, thermal, ultrasonic, DC offset, stable into reactive or mismatched loads |
| 12 V Trigger | +12 VDC or Dry Contact Closure, 2 x 1/8″ TS mono in/out |
| Weight (Unit) | 21.0 lb. (9.5 kg) |
| Damping Factor | >300 |
| Dimensions (Unit) | 19″ W (w/rack ears) 17” W (w/o rack ears) x 15.5” D x 3.5″ H (2 U) |
| Input Sensitivity | Variable 0 to 1 Vrms Analog: 1 Vrms for full output; level at maximum |
| Amplifier Channels | 16; 1 Stereo Bus Analog Loop Output |
| DAC Specifications | 32 to 96 kHz sample rate, 16-/24-bit depth |
| All channels active | 106 W |
| Power Output (4 Ω) | 200 W per channel |
| Power Output (8 Ω) | 100 W per channel |
| Signal-to-Noise Ratio | >105 dB, (A-wtd, ref full output) |
| Power Output (Bridged) | 400 W |
| Minimum Loudspeaker Load | 4 Ω |
| All channels 1/8th rated power | 354 W |
| Idle (main power on, all channels off) | 58 W |
| Full power (20 A residential service limited) | 2400 W |
Where to buy
No retail prices for ACP-AZ-P2680 yet.Check retailers
Documents
Guides that use this part
No guides tag this part yet.Browse guides
Contractors certified on RTI
Find Contractors who list a RTI certification.Find Contractors
Q&A and reviews
Discussions 0 tagged
No discussions tagged to this part yet.
Reviews
No reviews yet.
Max 4. Remove one.
Compare now