EFLOW102NX

Key specs

Input	120VAC, 60Hz, 3.5A.; Input fuse: 5A/250V.
Output	12VDC @ 10.0A supply current.; Auxiliary Power-Limited output rated @ 1A (unswitched).; Over Voltage Protection.
Electrical	Operating: 0° C to 49° C (32° F to 120° F).; Storage: - 20° C to 70° C ( - 4° F to 158° F).; Relative Humidity: 85% +/- 5%.; BTU/Hr. (approx.): 61 BTU/Hr.; System AC input VA requirement: 420VA.
Supervision	AC fail supervision (form "C" contacts).; Notification trigger is selectable for 30 seconds (factory set) or 2 hours.; Battery fail & presence supervision (form "C" contacts).; Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% (depending on the power supply). P
Temperature	Operating: 0° C to 49° C (32° F to 120° F).; Storage: - 20° C to 70° C ( - 4° F to 158° F).
Battery Charging	Built-in charger for sealed lead acid or gel type batteries.; Maximum charge current: 1.54A.; Automatic switch over to stand-by battery when AC fails.; Transfer to stand-by battery power is instantaneous with no interruption.; (Batteries are sold separately).
Visual Indicators	Green AC Power LED indicates 120VAC present.; AC input and DC output LED indicators.
Additional Features	Short circuit and overload protection.; Unit is complete with power supply, enclosure, battery leads and cam lock.
Fire Alarm Disconnect	Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.

Where to buy

No retail prices for EFLOW102NX yet.Check retailers

Documents

altronix.comManufacturer page EFLOW102NX DatasheetDatasheet EFLOW102NX DocumentDocument EFLOW102NX DocumentDocument

Guides that use this part

No guides tag this part yet.Browse guides

Contractors certified on Altronix

Find Contractors who list a Altronix certification.Find Contractors

Q&A and reviews

Discussions 0 tagged

No discussions tagged to this part yet.

Start a discussion about this part

Reviews

No reviews yet.

Write a review