How do I enter programming on a DoorKing 1834

Updated Source: 1834-065 Rev WSource: 1834-065 Rev WAsked 1 time
Quick answer

To enter programming mode on a DoorKing 1834 from the keypad:

Steps

From: Model 1834 80 Series Telephone Entry Sys install guide, pp. 30, 43, 45, 47

  1. Press 0 2 then enter your four-digit MASTER CODE (beep)
  2. Follow the specific programming section (e.g., 6 6 for names, 0 1 for phone numbers)

Specs & limits

From: Model 1834 80 Series Telephone Entry Sys install guide, pp. 30, 43, 45, 47

NoteMaster code is required for all keypad programming sequences.
NoteAdvanced features like time zones cannot be programmed from the keypad.

Applies to

1834

Sources

  1. Model 1834 80 Series Telephone Entry System Installation/Owner's Manual, p. 30 (1834-065 Rev W)
  2. Model 1834 80 Series Telephone Entry System Installation/Owner's Manual, p. 47 (1834-065 Rev W)
  3. Model 1834 80 Series Telephone Entry System Installation/Owner's Manual, p. 43 (1834-065 Rev W)
  4. Model 1834 80 Series Telephone Entry System Installation/Owner's Manual, p. 45 (1834-065 Rev W)
Was this right?