How to factory default axis M3106-L Mk II

Updated Asked 2 times
Quick answer

Factory default the Axis M3106-L Mk II with the control button, or from the web page if you can still log in.

Steps

From: M3106-L Mk II User guide: AXIS M3106-L M manual, pp. 12-13, 15

  1. Disconnect power from the Axis M3106-L Mk II
  2. Press and hold the control button while reconnecting power
  3. Keep the control button pressed for 15–30 seconds until the status LED flashes amber
  4. Release the control button
    Reset is done when the status LED turns green.
  5. Assign an IP address, set the password, and open the video stream with the Axis installation tools
  6. If you can still log in, go to Settings > System > Maintenance and click Default

Specs & limits

From: M3106-L Mk II User guide: AXIS M3106-L M manual, pp. 12-13, 15

NoteA factory reset clears all settings, including the IP address.
NoteWith no DHCP server, the default IP is 192.168.0.90.
NoteLost root password requires a factory default.
Status LEDamber flashes during reset; green means startup is complete.
NoteNetwork connector is RJ45 with PoE.

Applies to

M3106-L Mk II

Sources

  1. Axis M3106-L Mk II User guide: AXIS M3106-L Mk II User Manual (T10096264), p. 15, p. 15
  2. Axis M3106-L Mk II User guide: AXIS M3106-L Mk II User Manual (T10096264), p. 12, p. 12
  3. Axis M3106-L Mk II User guide: AXIS M3106-L Mk II User Manual (T10096264), p. 13, p. 13
  4. Axis M3106-L Mk II User guide: AXIS M3106-L Mk II User Manual (T10096264), p. 15, p. 15
Was this right?