Axis M3088-V sd card recording setup

Updated Asked 1 time
Quick answer

Set the AXIS M3088-V to record to the SD card when it detects an object, with a 5-second prebuffer and a 1-minute postbuffer.

Steps

From: M3088-V User guide: AXIS M3088-V manual, pp. 13-14, 24

  1. Make sure an SD card is installed
  2. Start the application if it is not already running
  3. Set up the application according to your needs
  4. Go to System > Storage and make sure the SD card is mounted
  5. Go to System > Events and add a rule
  6. Type a name for the rule
  7. Under Recordings, select Record video while the rule is active
  8. In the storage options, select SD_DISK
  9. Select a camera and a stream profile
  10. Set the prebuffer time to 5 seconds
  11. Set the postbuffer time to 1 minute
  12. Click Save

Specs & limits

From: M3088-V User guide: AXIS M3088-V manual, pp. 13-14, 24

Card typesmicroSD, microSDHC, and microSDXC.
NoteUnmount the SD card in the web interface before removal, and do not remove it while the AXIS M3088-V is running.
NoteInsert and remove the card with your fingers only; do not use sharp tools, metal objects, or excessive force.

Applies to

M3088-V

Sources

  1. Axis M3088-V User guide: AXIS M3088-V User Manual (T10245003), p. 13, p. 13
  2. Axis M3088-V User guide: AXIS M3088-V User Manual (T10245003), p. 24, p. 24
  3. Axis M3088-V User guide: AXIS M3088-V User Manual (T10245003), p. 14, p. 14
Was this right?