Axis q6355-le factory reset
Factory-reset the Axis Q6355-LE by holding the control and power buttons until the status LED flashes amber, or use the web interface.
Steps
From: Q6355-LE User guide: AXIS Q6355-LE manual, pp. 5, 21, 24
- Press and hold the control button and the power button
- Release the power button and keep holding the control button for 15–30 seconds until the status LED flashes amber
- Release the control button
- The camera is now at factory defaults
- With the installation tools, assign an IP address, set the password, and open the video stream
- Or, in the web interface, go to Maintenance > Factory default and click Default
Specs & limits
From: Q6355-LE User guide: AXIS Q6355-LE manual, pp. 5, 21, 24
| No DHCP | AXIS OS 12.0 and later uses link-local 169.254.0.0/16; AXIS OS 11.11 and earlier uses 192.168.0.90/24. |
|---|---|
| Note | Reset clears all settings, including the IP address. There is no default account; a lost admin password requires this reset. |
| Status LED | amber flashes during factory reset; green is steady for 10 seconds after normal startup. |
| Note | Do not stare at the operating lamp; it can emit hazardous optical radiation. |
Applies to
Q6355-LE